FEATURES:

MAXIDECOR Antica is a semi-transparent effective paint produced on the basis of an aqueous dispersion of acrylic binder, fillers, special additives and pigments, enriched with special acrylic pearls. MAXIDECOR Antica is a waterproof, good vapor permeable coating, harmless to humans and the environment, easy to apply. It is intended for the protection and decoration of interior wall surfaces where it is necessary to create an antique look. Can be tinted on MAXIMIX system to MAXIDECOR Antica tone card.

OPERATIING TEMPARATURE: The optimal operating temperature is from +10 °C to +25 °C. It should not be used below +5 °C.

CONSUMPTION RATE: 7–8 m2/L, depending on the roughness and absorption of the base, the technique and the method of application.

EXPIRY DATE AND STORAGE: 12 months from the production date marked on the packaging.

To be stored in original, tightly closed and undamaged packaging, at a temperature of +5 °C to +25 °C, protected from direct sunlight.

USE:

The surface must be: dry, load-bearing, clean and free of loosely connected parts, dust, water-soluble salts, grease and other impurities. The old paint that is not well connected, mechanically remove. Uneven surfaces are leveled with GLETOLIN G acrylic smoothing mass. Then, apply white ULTRADIS to the surface according to the manufacturer's instructions. After the ULTRADIS has dried, apply MAXIDECOR Antica, which is supplied ready to use, it only needs to be mixed by hand until homogeneous. MAXIDECOR Antica colored according to the MAXIMIX system and MAXIDECOR Antica from different batches and production dates must be homogenized! Apply the material gradually in small quantities in one layer, with the movement of the brush in all directions, on a surface of 1-2 m2. Under optimal conditions, 5-10 minutes after application, run a plastic fan over the applied material to break up the acrylic pearls and achieve the final look.