FEATURES:

MAXIDECOR Toga is an interior decorative textured coating of exceptional quality based on the aqueous dispersion of an acrylic binder, special fillers, additives and pigments. MAXIDECOR Toga is a washable coating, resistant to wear, with good vapour permeability, harmless for people and the environment and easy to apply. It is intended for the protection and decoration of interior wall surfaces. It is possible to achieve a number of different effects by using different application and texturing tools. It can be tinted with the MAXIMIX system.

OPERATIING TEMPARATURE: The optimum working temperature is between +10 °C and +25 °C. It should not be used below +5 °C.

CONSUMPTION RATE: 2–4 m²/L, depending on the roughness and absorbency of the substrate, technique and method of application.

EXPIRY DATE AND STORAGE: 18 months from the date of manufacture displayed on the packaging. Store in the original, tightly closed and undamaged packaging, at a temperature between +5 °C and +25 °C, protected from direct sunlight.

USE:

The surface must be: dry, load-bearing capable, clean and free of loose materials, dust, water-soluble salts, grease and other contaminants. Old paint that is not well adhered, should be mechanically removed. Flatten the uneven surfaces with the skimming compound GLETOLIN G. After that, apply MAXIDECOR Smooth Primer onto the surface, tinted to the approximate shade of the finishing material, all according to the manufacturer's instructions. After the primer dries, apply MAXIDECOR Toga, which is supplied ready for use. Just mix it well. MAXIDECOR Toga is tinted with the MAXIMIX system. Different batches of MAXIDECOR Toga with different dates of manufacture must be necessarily homogenized! Application Technique: Apply MAXIDECOR Toga evenly on the surface in a thicker layer with the help of a roller or brush. After the material is applied and before it begins to dry, pass artificial grass over the applied material in order to make linear marks. Once the first layer is dry, you can repeat the entire process of applying the material and making lines, only this time transversally. Once the material is completely dry, you can further highlight the wall texture by using thin-layers of MAXIDECOR decorative coatings: Velatura, Velvet, Glamour, Oceano. For additional protection against wear and stains, use MAXITOP wall protective varnish.