FEATURES:

MAXIDECOR Aura is a semi-transparent decorative varnish with special micro-crystalline prisms, which reflect different colors depending on the viewing angle. The range of color reflections ranges from turquoise and blue to purple. It is intended for indoors walls. It is exceptionally beautiful, waterproof and completely harmless for people and the environment.

OPERATIING TEMPARATURE: The optimum working temperature is between +10 °C and +25 °C. It should not be used below +5 °C.

CONSUMPTION RATE: 12–14 m²/L, depending on the roughness and absorbency of the substrate, technique and method of application.

EXPIRY DATE AND STORAGE: 18 months from the date of manufacture displayed on the packaging. Store in the original, tightly closed and undamaged packaging, at a temperature between +5 °C and +25 °C, protected from direct sunlight.

USE:

The surface must be: dry, load-bearing capable, clean and free of loose materials, dust, water-soluble salts, grease and other contaminants. Old paint that is not well adhered, should be mechanically removed. Level uneven surfaces with the GLETOLIN G skimming compound. After that, apply the texture covering coating for decorative techniques MAXIDECOR QUARTZ PRIMER, all in accordance with the manufacturer's instructions. The most evident effect can be achieved by applying MAXIDECOR QUARTZ PRIMER Nero, due to the deep black nuance of this paint, but any other nuance can be used as well. Once the substrate is dry, apply MAXIDECOR Aura gradually in smaller quantities in one coat, moving the brush in all directions, on an area of 1–2 m². Before the coating dries, run the dry brush gently across the applied material again, in order to create the final appearance and remove any brush marks. The coating can also be applied with a spraying machine or roller. When applying with a roller, make sure that the fiber length is not more than 12 mm and avoid leaving roller traces. In order to ensure optimal results when applying with a roller, we advise you to avoid substrates with extremely deep nuances. Irrespective of the application technique, you can apply a second layer in order to achieve an additional effect and ensure a more even application. MAXICOR Aura is ready for use, just mix it well. Products from different batches and with different dates of manufacture must necessarily be homogenized.