FEATURES:

MAXIDECOR Glamor is a high-quality metallic paint produced on the basis of a water dispersion of an acrylic binder, fillers, special additives and effective pigments. MAXIDECOR Glamor is a waterproof coating, with good vapor permeability, harmless to humans and the environment, easy to apply. It is intended for the protection and decoration of interior wall surfaces, where it is necessary to achieve an elegant and modern effect. It can be tinted according to the MAXIMIX system according to the MAXIDECOR Glamor color card.

OPERATIING TEMPARATURE: The optimal operating temperature is from +10 °C to +25 °C. It should not be used below +5 °C.

CONSUMPTION RATE: 9–11 m²/L, depending on the roughness and absorption of the base, the technique and the method of application.

EXPIRY DATE AND STORAGE: 18 months from the production date indicated on the packaging. Store in original, well-closed and undamaged packaging at a temperature of +5 °C to +25 °C, protected from direct sunlight.

USE:

The surface must be: dry, wearable, clean and free of loosely connected parts, dust, water-soluble salts, grease and other impurities. Mechanically remove old paint that is not well bonded. Smooth the rough surfaces with GLETOLIN G acrylic smoothing compound. Then, apply ULTRADIS tinted to the surface in the approximate shade of the sealing material, according to the manufacturer's instructions. After ULTRADIS has dried, MAXIDECOR Glamor is applied, which is supplied ready to use, it only needs to be mixed by hand until homogeneous. MAXIDECOR Glamor tinted according to the MAXIMIX system and MAXIDECOR Glamor from different batches and production dates must be homogenized! The material is gradually applied in smaller quantities in one layer, with the movement of the brush in all directions, on a surface of 1–2 m². In optimal conditions, 5-10 minutes after application, dry brush again over the applied material to achieve the final look.