
Categories
Menu
Same Brand
MAXIDECOR Velvet - 1 L.
MAXIDECOR Velvet is a spectacular paint of exceptional quality, produced on the basis of a water dispersion of acrylic binders, fillers, special additives and spectacular pigments.

Share on:
FEATURES:
MAXIDECOR Velvet is a spectacular paint of exceptional quality, produced on the basis of a water dispersion of acrylic binders, fillers, special additives and spectacular pigments. MAXIDECOR Velvet is a waterproof coating, with good vapor permeability, harmless to humans and the environment, easy to apply. It is intended for the protection and decoration of interior wall surfaces, where it is necessary to create an exciting and dynamic effect. It can be tinted according to the MAXIMIX system according to the MAXIDECOR Velvet color card.
OPERATIING TEMPARATURE: The optimal operating temperature is from +10 °C to +25 °C. It should not be used below +5 °C
CONSUMPTION RATE: 10–12 m²/L, depending on the roughness and absorption of the base, the technique and the method of application.
EXPIRY DATE AND STORAGE: 18 months from the production date indicated on the packaging. Store in original, well-closed and undamaged packaging at a temperature of +5 °C to +25 °C, protected from direct sunlight.
USE:
The surface must be: dry, wearable, clean and free of loosely connected parts, dust, water-soluble salts, grease and other impurities. Mechanically remove old paint that is not well bonded. Rough surfaces are leveled with GLETOLIN G acrylic smoothing compound. Then MAXIDECOR Smooth Primer, tinted in the approximate shade of the finish material, is applied, according to the manufacturer's instructions. After the primer has dried, MAXIDECOR Velvet is applied, which is delivered ready for use, it only needs to be manually mixed until completely homogenized. MAXIDECOR Velvet, tinted according to the MAXIMIX system and MAXIDECOR Velvet from different batches and production dates must be homogenized! The material is first applied with a brush in one layer with criss-cross movements to prepare the coating for further processing. While the applied material is still fresh, use a stainless steel or plastic trowel with rounded edges to create the appropriate effect, creating a sense of "depth". The mallet should be at an angle of approximately 30 degrees to the surface, applying slight pressure. If you do not want to use a trowel, the appropriate effect can be achieved only with a brush, by gradually applying the material in small amounts in one layer, with cross or semi-circular movements of the brush. Immediately wash tools with water after use.
Shipping
Shipments are usually shipped within 1 or 2 days after payment is received and are shipped via Econt. Your shipment is delivered the next business day. Until 6 p.m. for door-to-door shipments, and for shipments to Econt's office - as early as the morning when the site opens. Except for the settlements that are on schedule.
For more information, please follow the link here.
To return a product you have purchased, please follow the steps below:
Contact store@stroyko.bg or call +359 66 801 558 and indicate your order number, reason for returning your product and whether you want to return it to the store yourself or you want us to pick up the items for you.
For more information, please click here.
You may also like
Previous
Next