Areas of application:

For sealing and connecting joints indoors with low compressive and tensile loads, e.g. for sealing cracks in masonry, plaster or concrete.

Typical foundations:

Using a primer: clinker bricks, bricks, wood, concrete, aerated concrete, gypsum, plasterboard, plaster, silicate bricks.

Technical data:

Basis of the raw material: Acrylic dispersion

Primer: On absorbent or porous surfaces. A mixture of acrylic sealant with water in a ratio of 1:1 to 1:5

Max. permissible permanent traffic load: 10% of the joint width.

Surface crusting time: About 10-12 minutes at +23°C and 50% relative humidity. humidity.

Curing speed: About 1 mm/day at +23°C and 50% relative humidity.

Temperature resistance: From −10°C to +80°C

Operating temperature: From +7°C to +40°C

Can be painted: Yes, prior experience is required.

Paint compatibility: Yes, prior experiments are required.

Fungicidal action: No.

Elongation to break for 2 mm film: About 50%

Density: 3 1.69 g/cm

For filling and sealing cracks and joints in porous building materials.

• Subject to painting / plastering. Excellent adhesion of standard varnishes, paints/plasters to the sealant.

• Wide range of applications. Suitable for indoor joints subject to low expansion.

• Does not contain silicone.

• Resistant to aging, weathering and UV rays.