HOW IT IS CALLED Add 25 kg of KERAMOL Flex to 7 L of water and mix until a homogeneous mixture without lumps is obtained. Wait 15 minutes, then stir vigorously again. The mixture thus prepared is ready for laying and must be used within 2 hours. The surfaces on which the glue is applied must be wearable, cleaned of dust, grease and other dirt. Larger roughness is filled with KERAMOL Flex adhesive one day before laying the tiles. Before applying the adhesive, prime the surface with a suitable MAXIKRIL primer depending on the condition of the surface. If gluing "tile on tile"
, prime with MAXIKRIL Ceramic primer.The adhesive is applied with a notched trowel so that for internal work at least 65% of the surface of the tile is covered with adhesive, while for external work the adhesive
must be applied to the entire surface of the ceramic tile. Place the tiles on top of the applied glue, adjusting them left-right, up-down. The joints between the tiles are filled with FUGALIN grout min. 24 hours after installation. After gluing the tiles, immediately wash the tools with water.

Operating temperature: During operation, temperatures should be from +5 °C to +30 °C.
Atmospheric conditions can affect the curing process. Consumption: 2–5 kg/m², depending on the quality of the prepared surfaces, the technique and the method of application.
Shelf life and storage: 12 months from the production date indicated on the packaging.
To be stored in closed and undamaged packaging, in a dry and ventilated room.

GOOD TO KNOW
C2TE 
 CE
For external and internal use
For external and internal use dilution
with water 7 L / 25 kg
Available in a pack 25 kg